Monday, 05 December 2022


Double swing gates

Double swing gates consist of two wings, posts, hinges and other accessories required for the functioning of the gate.

The frame of the double swing gate is made ​​up of a tube of rectangular cross-section 60/40/2 mm welded to the LEGI panel. LEGI panel is constructed out of vertical wires Ø 6mm and reinforced with double horizontal wires Ø 8 mm. Cross-section of the post (lowest 100x100x3mm) is changed depending on the size of the gate. Standard heights of wings range from 1000 to 2400 mm at a distance of 200mm; widths of wings range from 2000 to 6000 mm at a distance of 500 mm per wing.

It is possible to combine the LEGI system Vario S gates with different LEGI panels. On demand, we can manufacture different sizes.  With three-wing gates, there is a possibility of combining different widths of wings.

This construction is stable due to the strong connections of LEGI posts with Vario S gates and specially patented LEGI cylinder locks.

The gate normally opens to the inwards, but according to your wishes, it can be set to be opened to the outward. The direction in which gate opens (to the left or to the right) is determined by the position of the screws on the LEGI posts, to which the gate is attached. Opening direction of the gate can be decided during the installation itself. There is a possibility of changing the opening direction even for the already mounted wings. The design of the bottom latch, specially developed for LEGI Vario, significantly contributes to accident prevention because it is integrated into the Vario gate frame and is blocked and inaccessible when the gate is closed.

Karakteristike LEGI VARIO S kapije:

  • Accident prevention – no protruding parts
  • Various usage possibilities
  • There is a possibility of upgrade at any time (E.g. with lockable bottom catches, with deflectors, etc.)
  • Convenient storage – LEGI VARIO is series-manufactured and is therefore always available
  • Clear design, smooth lines, flush-fitting fronts
  • Special designs can be implemented (E.g. post infill, jagged edges)

As with other LEGI gates models, it is possible to set up motorization.

All used steel parts are hot-dip galvanized according to DIN EN ISO 1461 European standard, and optionally colored by environmentally friendly powder coating, which makes elements resistant to UV radiation and prevents the peeling and fading of color.

Our standard colors are listed below. However, by order, we supply elements in all RAL colors.

 boje ral h eng


Double swing gate Vario S prospectus   pdf

Double swing and single gate Vario S instruction for installation   pdf







Fence systems






All of our products are highly functional, economical, elegant and easy to install. The uniqueness of the LEGI operations lies in professional service, special technology and long warranty on our high-quality products (from 10 to 20 years).


LEGI Certificates


All LEGI products meet the standards of ISO 9001: 2015, from design, through production to galvanization and hot galvanizing as well as plastification.

legi sertifikati




Address:  ul. Novo naselje 10
11000 Beograd
Phone: +381 66 5455 005
+381 60 5455 001

This email address is being protected from spambots. You need JavaScript enabled to view it.  |

PIB: 103934577   |  M.B.: 20054140
Ž.R.: 160-206926-98
Bank Intesa